This single-flute Countersink has been one of our
steadiest sellers over the years and we have continually
improved it - providing it with a better cutting edge, making it
chatter free and spiffing up its general appearance. We now
believe it to be the best general purpose woodworking
countersink on the market, and perhaps deserving of some extra
copy extolling its virtues. The Countersink is a natural
companion to the Wood Threader - essential for making a neat
bevel on a hole drilled for tapping, but it is also a great
basic tool for smoothing rough edges, cutting an 82� chamfer on
holes from 0 - 1" or countersinking screw heads of any size. We
have it manufactured with a 3/8" shank so that you can use it on
either a hand drill or a small drill press. It is an
unpretentious - even humble - tool, but, like the right size
screw driver, one very difficult to be without. $19.95 - PN #0365
Editors Comments on the #0365
Countersink: "I have used this countersink for many years in my
shop and highly recommend it for all countersink work. It will
not grab and mess up your work. It is the perfect angle to get
clean, sharp countersinks in all materials."
NEW 05/03/06
Now the new units are on their way into our stock at lower
pricing.
Lathe Spindle Taps
These taps are machined in lathe spindle
sizes so that after you have drilled a wood block, you can
tap it and mount it directly on your lathe. The tapped block
can then be put to use in a special face plate, vacuum
fixture or other mounting assembly.
Offered in three sizes -1" - 8, 1-1/4" - 8, or 33 mm.
#0366
- Lathe Spindle Tap 1"
- 8 tpi $17.95
#0368 - Lathe
Spindle Tap 1-1/4" - 8 tpi $26.95
#0369
- Lathe Spindle Tap 33 mm $26.95
The #1632 includes:
Adapters for 1" x 8 tpi and 3/4" x 16 tpi
Basic straight jaws for gripping round or square pieces up to 1-1/8".
#2 round jaws that grips round stock externally from 1-1/2" to 2-1/4", and
internally bored holes from 2" to 3".
#1 stepped jaws
for gripping smaller dowels from 3/8"to 1-3/8" diameter bored holes from and 1"
to 2-3/8" internally.
2 each open/close levers
Chuck with all 3 sets of jaws - Only $89.95
Special Combo Offer
Order #1632-1 and receive both the #1632 Chuck System and the #1631 Flat
Jaws set for only $109.90. Save $5.00.
These are great looking chucks
that are very smooth when operated.
This is an all new chuck with full compatibility with other options.
Our #1632 Chuck is the ultimate mini-lathe chuck. This 4 jaw self-centering system
(shown at left), provides
every-thing you need in a mini-lathe chuck system.
Only $89.95
Optional Flat Jaws
for use with the 1632 chuck
#1631 -
Optional 4-3/4"
Flat Jaws
for the 1632 Chuck.
Grips rim of bowl up to 4-3/4" diameter.
#1631 -
4-3/4 inch Flat Jaws for
#1632
Qty:
Price: $24.95
#1642 -
Optional 8" Jumbo Flat Jaws
for the 1632 Chuck.
Grips rim of bowl up to 8" diameter.
Requires a lathe with at least a 10" swing.
Order #1633 at only $39.95 for the set..
NOTE: Forstner Bits are
Included in this set.
10 Pc Expanding Jam Chuck System
Numerous turning projects require a "jam chuck" - however
hand turning the chuck is time consuming and not always accurate. This
system solves the jam chuck problem. Insert the system's tough rubber chuck
into your work then expand it by turning a nut to conveniently secure the
work piece.
This package includes five chucks plus the Forstner bits to
drill the jam chuck holes. Sizes 3/4", 1", 1-1/4", 1-1/2", and 2"
This Chuck system is ideal for all mini lathes where the headstock is
not as heavy duty as those for larger lathes. You get all the big chuck features,
plus less
weight for longer lasting bearings on lighter lathes.
Barracuda Mini Chuck System
#1236 - Barracuda
Mini Chuck System - $99.95
Here's a full
featured and complete chuck system in a small package. It is ideal
for small cup projects, miniatures and small spindle work. This
premium 4-jaw self-centering chuck system fits mini, midi and micro
lathes and adapts quickly to 3/4" x 16 tpi and 1" x 8 tpi headstocks.
The system includes: a screw thread adapter, #2 round jaws, pin jaws
and #1 mini step jaw sets. Weighs only 1.2 lbs, and has a 2-1/8"
diameter. (NOTE: accessories for larger Barracuda Chucks will not
fit this small chuck system)
