|
| |
Morse Taper Live Headstock, Tailstock, and Hollow Centers
|
|
 |
Morse Taper
Live Tailstock Centers
Morse Taper Live Tailstock Centers
with 60 deg point:
#1638 - #1 Morse
Taper
#1639 - #2 Morse Taper
Heavy Duty with 60 deg point
& ball bearing precision.
|
|
 |
Morse Taper
Hollow Live Center
1671 - #1 MT Live Center -
19.95
1672 - #2 MT Live Center - 19.95
|
|
1674 - 1/2 inch crown
1675 - 1 inch crown |
#1 Morse Taper Crown
Super Center
1674 - #1 MT - 1/2" Crown Super Center - 19.95
1675 - #1 MT - 1" Crown Super Center - 19.95
Get a better bite on your spindle with our new Super Center. More teeth
give a better bite while providing equal pressure and a positive drive.
There is no need to hammer your drive center into the work piece and risk
splitting your work. A spring-loaded point simplifies the positioning of
your spindle in the center and retracts to avoid splitting your work when
tailstock pressure is applied.
|
|
1676 - 1/2 inch crown
1677 - 1 inch crown |
#2 Morse Taper Crown
Super Center
1676 - #2 MT 5/8" Crown Super Center - 19.95
1677 - #2 MT 1" Crown Super Center - 19.95
Get a better bite on your spindle with our new Super Center. More teeth
give a better bite while providing equal pressure and a positive drive.
There is no need to hammer your drive center into the work piece and risk
splitting your work. A spring-loaded point simplifies the positioning of
your spindle in the center and retracts to avoid splitting your work when
tailstock pressure is applied.
|
|
|
 |
Save
up to $60 with this quality replacement centers accessory set.
Individual items
purchased separately elsewhere would cost over $100.
This set includes hard to find replacement centers for Jet, Delta, and
other lathes equipped with #2MT headstock and tailstock centers. Packaged in
attractive and convenient wood display box.
#4013 - Set includes:
-
5/8"dia headstock
spur center for narrow spindles
-
1"dia headstock spur
center for standard spindles
-
Live ball bearing
tailstock center with cup and point
-
Hollow center for
drilling 5/16" thru holes (for lamps, etc)
|
|
